Fiat 500 Key Fob Replacement
If your 500 key fob fails to function, try using another one to see if the car will recognize it. If it does, then the issue may be with the battery or water damage on the original fob.
Replace the battery first. The "+" side should be facing down.
Dead Battery
The battery is usually the cause of a fob not working. It's not difficult to fix Most fobs provide a warning signal if the battery is not fully charged. You can find the instructions on YouTube for nearly every key fob on your vehicle or in your owner's manual. You can also change it by taking it to a locksmith or dealer who supplied it to you.
Sometimes a fob will stop working due to a problem in the internal circuit board. This isn't very common however it can happen. If you drop the fob on something sharp, it may damage the internal chip. This could also happen if you use an aftermarket key and the fob does not function. In this case it is essential to see a dealer or locksmith to have the key reprogrammed to work with your 500.
One 2012 FIAT FIAT 500 flip key remote that resembles Ilco with lock, unlock, and trunk buttons – new keyless entry replacement (will need to cut & program by locksmith).
Damaged Chip
A fiat 500 key fob is wireless device that gives the signal needed for the car to start once you press the button. It is equipped with a microchip that contains information about the code that will allow it to communicate with the car. If the chip is damaged, it will not send the correct code, and the car will not start. A locksmith can repair the damage. United Locksmith is capable of completing this service for classic models as well as newer ones, so don't feel in a rush to call them.
You can buy a new fob and have it programmed professionally by a locksmith. It's cheaper to do this than go to a dealer and it works the same way. You will need to provide some information for the locksmith, for example, the year your vehicle was manufactured and the model.
If you are not sure how to fix this problem you can try using the help of a US dollar bill. The copper in the bill is abrasive and will remove dirt and oxidation. However, it will not cause harm to the microchip. If the chip is physically damaged, it might not be able to be repaired. This can happen when you drop it, knock it over by accident with your vehicle or experience any other kind of physical strain.
Water Damage
Water damage is likely to happen on your device, whether you dropped them in the pool accidentally or put them in the pocket while swimming, or splashed them with water during a rainy afternoon. Even if there is only an ounce of water on the key, it could cause serious problems to the electronic components of the key.
It is possible to fix this issue by getting rid of the fob and then cleaning it with a towel. After the fob is dry you can replace the battery. It will then begin working again.
You can take it to an auto shop or locksmith to have it professionally programmed and cleaned. replacement fiat key can employ special equipment to make sure that the fob's key works with your car's computers.
If your Fiat 500's keys fob fails to function, it can be frustrating and stressful. You may be tempted visit a dealer to get your key fob replaced however, this can be expensive and difficult to arrange. Locksmiths can handle every aspect of your car's key fob replacement without the necessity of a dealer visit. This is why they are a superior choice than an auto dealer.
Pairing Issues
If you drop your key fob, or it stops working but nothing else seems to be going on, it could be the chip that is malfunctioning. It could be because of water damage or a dead battery.
This is often done by simply following the directions in your owner's guide. However it's a good idea to hire an automotive locksmith assist you if you're experiencing difficulties or the steps in your manual aren't working for you. This will ensure that your chip isn't fried and will likely be the most affordable solution.
A number of owners have reported that their key fobs won't allow them to lock their cars. This can be a big issue if you're at the gas station to refill. Some owners have reported the locking mechanism on their 500's failing and needing to replace the entire intermediate shaft of the steering. Fiat has even mentioned this issue in an technical bulletin (TSB).
If you're experiencing issues with your Fiat car, an experienced locksmith could help. They will duplicate your current key or create a brand new one that is able to lock and start the car. They are able to do this without looking at your old key, and it's generally cheaper than buying one from the dealer.